Barreto Track Stump Grinder

The Barreto track stump grinder is a fully hydraulic stump grinder that is perfect for small to medium size stumps.  With an upgraded cutting wheel and a wider cutting wheel swing this stump grinder is perfect for quick cutting of almost any stump.  Also, because there are not belts driving the cutting wheel there is no risk of breaking the belt.  Ask our staff about the difference between this machine and our Carlton 35hp stump grinder to get the job done.

Toro Z3000 Zero-Turn Ride On Mowers

The Toro Z3000 zero turn ride on mower is perfect for any commercial or residential lawn.  The mower deck is 52″ wide and has has a 25hp Kohler engine.

Skidsteer Rockhound Attachment

The rockhound attachment is the perfect tool to prepare soil for planting.  The rockhound will remove a rocks up to 2.5″ deep and put it in the bucket for easy dumping on the side.

1.5 Ton Ride On Roller

The ride on roller is perfect for compacting crush and run, dirt, and asphalt.  It has a water system so the asphalt won’t stick to the drum.  It also has a vibration system to create more ground pressure.

3-5 Ton Ride on Asphalt Roller

The Bomag BW120AD-4, 3-5 ton ride on roller is perfect for compacting crush and run, dirt, and asphalt.  The drum is 47″ wide and has a water system so the asphalt won’t stick to the drum.  It also has a vibration system to create more ground pressure.

Takeuchi TL12 Track Loader

The Takeuchi TL12 has a strait arm design and is intended to increase dig out force 8,660 lbs, with a dumping height of 10’6”.  The TL12 has a lifting capacity of 4,051 lbs. This Takeuchi track loader weighs 11,800 lbs and comes with a smooth edge or tooth edge 72″ wide bucket.  It is also equipped with extra wide tracks for better traction and lower ground pressure (4.7 PSI) in soft ground environments and a fully loaded, heated and A/C cab.  A variety of attachments are available for these machines upon request, and comes with either a tooth or smooth bucket.

Click Here for Spec Sheet

Link-Belt 80 X3 Excavator

The Link-Belt 80 X3 has a operating weight of 18,585 lbs and a 54 hp Isuzu engine.  We added the 6’11” arm, which has a digging depth of 15’1″.  Rental Works also added rubber road tracks for all of your road work needs.  The 80 X3 comes with a standard 36″ bucket.   See Spec Sheet

Dri-Eaz DriTec 4000i Desiccant Dehumidifier

The DriTec 4000i Desiccant dehumidifier treats 395 cu/ft of air per minute and removes 118 pints of water from the air per day.  It works in low temp and low humidity conditions and since the DriTec 4000i does not collect water and does not use a temperature-sensitive refrigeration system, it will continue removing moisture effectively in sub-zero temperatures.  The air must be duct out of the room that is being dried and if done properly you can get the humidity to 0%

Scaffolding Internal Stairs

The scaffolding stairs allow you to create a safe stairway in 6′ masonry scaffolding.  The stairs comes with the stairs as well as the safety rails to go into a 6′ section of scaffolding.  The 6′ scaffolding is rented separately.

Pressure Washer Hot Box

Make any pressure washer a HOT pressure washer with our hot box unit.