Aerial Lifts

Genie GR-20 Runabout

Genie® Runabout® GR™-20 lifts are compact, low-weight machines that increase productivity on the job thanks to their ability to fit through doorways and in most passenger elevators. And, it can be driven through doorways with operator on board. A zero inside turning radius and full elevation drive feature also contribute to these models’ increased productivity.

Genie GS-1930 Scissor Lift

The Genie GS-1930 is 30" wide and can fit through any standard doorway with a height of 31".  The platform goes to a height of 19' and has a working height of 25'.  This scissor lift has hard non marking tires and must be used on hard level surfaces. It is battery powered and must be recharged each night on a standard 120 outlet.

Genie GS-2632 Scissor Lift

The Genie GS-2632 is 32" wide and can fit through any standard doorway up to 33".  The platform goes up to a height of 26' and has a working height of 32'.  This machine has hard non marking tires and must be used on a hard level surface.  It is battery powered and must be recharged each night on a standard 120 outlet.

Genie GS-3232 Scissor Lift

The Genie GS-3232 is 32″ wide and can fit through any standard doorway up to 33″.  The platform goes up to a height of 32′ and has a working height of 38′.  This machine has hard non marking tires and must be level to extend.  It does have 4 outriggers to level the machine up to a 5 degree slope.  It is battery powered and must be recharged each night on a standard 120 outlet.

Genie GS-3246 Scissor Lift

The Genie GS-3246 is 46″ wide and can fit through any double doorway up to 47″.  The platform goes up to a height of 32′ and has a working height of 38′.  The GS3246 also has a higher weight capacity than any other scissor lift.  This machine has hard non marking tires and must be used on a hard level surface.  It is battery powered and must be recharged each night on a standard 120 outlet.

Genie GS-4047 Scissor Lift

The Genie GS-4047 is 47″ wide and can fit through any double doorway up to 48″.  The platform goes up to a height of 40′ and has a working height of 46′.  The GS4047 also has a higher weight capacity than any other scissor lift.  This machine has hard non marking tires and must be used on a hard level surface.  It is battery powered and must be recharged each night on a standard 120 outlet.

Genie S-125

The S-120 has a working height of 126' and a horizontal reach of 75'.  It is a diesel powered engine and 4 wheel drive.  The Genie S-120 boom lifts weighs 44,340 lbs and is 8' 2" wide stowed, and 11' axle's extended for working width.  The bucket capacity is up to 750 lbs.

Genie S-60

Easily complete heavier lift tasks on construction and industrial job sites with the Genie S-60 telescopic boom — offering a lift capacity of 500-lb, 50 ft 10 in of horizontal reach and a 360˚continuous rotation turntable for quick positioning.

Genie S-65

The Genie S-65 boom has a working height of 71' and a horizontal reach of 56' 2".  The buckets lifting capacity is 500 lbs.  The machine is 8'2" wide and weighs 22,270 lbs.  It is a 4 wheel drive machine and diesel powered.

Genie S-85

The S-85 has a max platform height of 92' and a horizontal reach of 76' 6".  It is a diesel powered engine and 4 wheel drive. The Genie S-85 boom lifts weighs 35,560 lbs. and is 8'2" wide, the bucket capacity is up to 500 lbs.

Genie TZ-50 Tow Boom

The Genie TZ-50 has a working height of 55'6", and an up and over capability of 20' up, and 29'2" over.  This unique lift is a hybrid, it is battery powered, but with its on board Honda engine the working time is greatly extended.  The Genie TZ-50 is designed for indoor or outdoor use and can fit through a standard 6'8" doorway.  Width stowed is 4'9" and working width is 11'10".

Genie Z 45/25J RT

The Genie Z-45 working height is 51'11" and an up and over capability of 23'6" up, and 25' over.  The engine can be fueled by either gas or propane so that it can be run indoors.  It is 4 wheel drive.  The Genie Z-45 is a 14,000 lbs.

Genie Z-60/34

The Genie Z-60/34 Self-Propelled Articulating Boom Lift has a working height is 66 ft 4 in with an up and over clearance of 27 ft.  It has a diesel engine and is 4 wheel drive.  Some extra add-ons to this machine include its non-marking tires, hazards condition kit, and a light package on the basket.  This articulating boom lift weighs 22,520 lbs. with a width of 8' 1" and a bucket capacity of 500 lbs.

JLG 1350SJP Ultra Boom

The 1350SJP has a working height of 141′ and a horizontal reach of 80′.  It is a diesel powered engine and 4 wheel drive.  The JLG 1350sjp ultra boom lift weighs 44,998 lbs and is 8′ 2″ wide stowed.  The axle needs to extend to 12′6" in order to reach its full height.  The bucket capacity is up to 1,000 lbs.

JLG 460SJ

The JLG 460SJ Telescopic Boom Lift has a working platform height of 46 ft  and horizontal outreach of 39ft.  The engine can be fueled by either gas or propane, so that it can be run indoors and is 4 wheel drive.  The JLG 460SJ weighs 16,600 lbs and a basket weight capacity of 600 lbs.